Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: W14 on April 05, 2003, 22:54:30

Title: Correct routing for B/U light switch wiring?
Post by: W14 on April 05, 2003, 22:54:30

Hi Group,

I am wondering if the wiring to the back-up light switch at the transmission is correct on my car: it exits the firewall near the clutch fluid hose, then goes underneath the trans., and comes up the right hand side to the switch on the right-top of trans.
Is this correct?

Will W14
1965 230SL 4spd
Victoria,BC

Title: Re: Correct routing for B/U light switch wiring?
Post by: Naj ✝︎ on April 07, 2003, 02:32:51

Mine was hanging below the gearbox as you say but I have now routed it 'over' the gearbox.
Don't know which is correct!
naj

naj
hobel 65 230SL
jalopyno 68 280SL

Title: Re: Correct routing for B/U light switch wiring?
Post by: W14 on April 07, 2003, 23:55:44

Thanks Naj,

I'll probably route mine that way as well - it will be a lot more protected that way.

Will W14
1965 230SL 4spd
Victoria,BC