Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: pdc on November 02, 2013, 11:39:09

Title: cruise to Caribbean
Post by: pdc on November 02, 2013, 11:39:09
Any members here from St Maarten, Bahamas and St Thomas ?
I am sailing  from Fort Lauderdale today. Being jet lagged (up to early) I got on this forum I started wondering if there would be any pagoda's over there. I looked in the member section but couldn't find anyone.

If I see a nice classic; I'll post it here and bring some sun in your grey days , at least for the Europeans here :D
Title: Re: cruise to Caribbean
Post by: Peter van Es on November 02, 2013, 13:46:24
Pascal…

list of members in Florida… http://www.sl113.org/forums/index.php?action=mlist;sort=location;start=1700

Also check the following pages...

Peter
Title: Re: cruise to Caribbean
Post by: Rolf-Dieter ✝︎ on November 02, 2013, 14:08:53
Peter, I think he may be out of luck weather forcast is mainly raining … I think most Pagoda owners are washing there treasure today  ;D
Title: Re: cruise to Caribbean
Post by: pdc on November 02, 2013, 14:24:30
Well that would be something different ; rain

Thanks for making my day Rolf  8)
Title: Re: cruise to Caribbean
Post by: Flyair on November 02, 2013, 14:29:49
Pascal,

I've been several times to St Martin and other Caribbean islands. From memory, there were some vintage american cars, but never saw any Mercedes older than 20 years. Possibly it is the question of humid and quite salty air that do not favour old European cars ???
Title: Re: cruise to Caribbean
Post by: Rolf-Dieter ✝︎ on November 02, 2013, 14:35:53
Sorry Pascal, to be the bearer of bad (wet news) however, think of the bright side after each rain there be sunshine :) so be happy … have a great cruse !

Title: Re: cruise to Caribbean
Post by: Flyair on November 02, 2013, 15:25:57
The only member of our forum registered in the Caribbean area is Sonja, sadly inactive though :-[

here is the list with her name
http://www.sl113.org/forums/index.php?action=mlist;sort=location;start=0