Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: Allen F on July 27, 2004, 21:24:43

Title: Smokes at Start Up...Progress
Post by: Allen F on July 27, 2004, 21:24:43

Hi Folks,

I have a question on distributor rebuilds.  I have my engine in the sleeve/ ring/ head overhaul process, and I pulled the distributor apart to remove some sand.  In the process, I think I stretched out some springs.  Are there rebuild kits around for these?

Thanks
Allen Frechette

Title: Re: Smokes at Start Up...Progress
Post by: Cees Klumper on July 27, 2004, 22:33:13

Dan Caron (DrBenz) sells Bosch rebuild sets. I have not found them anywhere else.

Cees Klumper in Amsterdam
'69 white 280 SL automatic

Title: Re: Smokes at Start Up...Progress
Post by: mdsalemi on July 29, 2004, 19:36:04

Better yet, post the distributor to Dan and let him do it in his operating room and put it on his tester...he's the distributor guru.


Michael Salemi
1969 280SL
Signal Red w/Black Leather
Restored

Title: Re: Smokes at Start Up...Progress
Post by: George Davis on July 30, 2004, 08:29:32

I agree with Michael.

George Davis
'69 280 SL Euro manual