Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Bob G ✝︎ on July 12, 2013, 00:49:15

Title: Flasher for 280SL
Post by: Bob G ✝︎ on July 12, 2013, 00:49:15

Hi guys.
I have a question for you all who need to replace the emergency Flasher in our Pagodas.

I was told that the new design does not have pins to plug  in. When talking to the Classic
Center in Irvine,  I was told by Woody, that there is a jumper wire to plug the new one in from the old
design? Is  this information correct?
Bob Geco

Title: Re: Flasher for 280SL
Post by: 66andBlue on July 12, 2013, 16:43:00

Bob,
it is not a jumper wire but moving a wire from one pin to another pin.
All described here in the technical manual:
http://www.sl113.org/wiki/Electrical/FlasherRelay

Title: Re: Flasher for 280SL Please send me a picture. Bob
Post by: Bob G ✝︎ on July 15, 2013, 16:01:05

I do better with pictures . What I got has a electrical tail . the replacement flasher is not the same.
I asked Woody at the classic center before I  purchase this new replacement to make sure
there is no modification needed. I will send you a picture of what I got with the part number.
Sincerely
Bob Geco

Title: Re: Flasher for 280SL
Post by: Peter van Es on July 16, 2013, 07:48:27

Bob, there is a picture at the link provided.

Peter