Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: County Guy on July 08, 2013, 18:08:10

Title: Seat assembly
Post by: County Guy on July 08, 2013, 18:08:10

Hi, all  I'm putting my seats back together and have made a trial run but seem to have eight black plastic spacer type things left over.  The only place I think they might go is between the steel dog-leg bracket and the side of the seat itself, as a kind of spacer to keep the steel away from the leather.  I can't seem to find anything in the Parts List catalogue.  Am I right on this?  Yes, I should have documented the removal better.  Oh well, next time.

Title: Re: Seat assembly
Post by: waltklatt on July 09, 2013, 00:19:59

Yep, you answered your question.  
They do keep the dogleg hinge bracket from the leather.
Walter

Title: Re: Seat assembly
Post by: County Guy on July 09, 2013, 01:49:43

Thanks for the quick reply, Walter.  I thought I could feel the plug holes under the leather but I didn't want to chance making the holes until I was sure.  Maybe it would help if I could find the old seat covers.

lockie

Title: Re: Seat assembly
Post by: billhon on April 22, 2014, 20:57:39

did you replace the springs?I'm looking for device on rebuilding my seat frames with springs excetera. Thanks.

Title: Re: Seat assembly
Post by: County Guy on April 23, 2014, 05:48:43

I was fortunate that the seat bottoms and backs were supple enough that I could reuse them.  Good luck on the seat (http://)rebuild.  I think it will be challenging.