Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: 280sl1968 on May 26, 2013, 23:13:26

Title: Screws and bolts for fresh air cowl and flaps
Post by: 280sl1968 on May 26, 2013, 23:13:26

Does anyone know the current MB part number for the screws, bolts and washers used in the fresh air vent cowl assembly and flap (or alternatively the original specifications so I can seek out an alternative)?

Specifically I'm referring to:

- the screws that attach the chrome grille
- the four screws attaching the cowl (incl the two near each wiper)
- the screws at the back that the rear of the cowl slot into under the windscreen
- the small bolts/ washers attaching the flap to the hinges

Many thanks,

David

Title: Re: Screws and bolts for fresh air cowl and flaps
Post by: Benz Dr. on June 01, 2013, 14:51:07

I use counter sunk philips screws in stainless when I can find them.

Title: Re: Screws and bolts for fresh air cowl and flaps
Post by: 66andBlue on June 04, 2013, 04:13:32

David,
the part numbers correspond to the numbers in the photo below:
1. p/n 0007981 003226 / 4 each / oval head sheet metal screw
2. p/n 0007981 003225 / 2 each / oval head sheet metal screw
3. p/n 0007982 003215 / 2 each / countersunk sheet metal screw
4. p/n 0007983 004202 / 3 each / oval head countersunk sheet metal screw / chrome

You can order them from the same source together with the interior insulation pad.
{btw, are you in British Columbia or in the UK??)