Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: SilverSpear on January 30, 2013, 12:09:50

Title: Exhaust Clamps
Post by: SilverSpear on January 30, 2013, 12:09:50
Hello guys,

Tried to look for info about the correct clamp sizes without luck.
Can anyone pls provide some info about sizes, quantities and fitment location?

Thanks
Title: Re: Exhaust Clamps
Post by: ja17 on January 31, 2013, 04:41:52
No clamps on an original installation. Everything is welded.   Just measure the diameter of the pipes you are installing. Seems like 1 7/8" sounds familiar.   That should be around 46mm plus or minus. Check to make sure.
Title: Re: Exhaust Clamps
Post by: SilverSpear on January 31, 2013, 22:47:06
Oh now I understand why there are no clamp details in all those Pagoda exhaust graphs:

http://www.sls-hh-shop.de/en/230-280SL-W113/49-a-Exhaust-System-standard/?_artperpage=10 (http://www.sls-hh-shop.de/en/230-280SL-W113/49-a-Exhaust-System-standard/?_artperpage=10)

Thanks!