Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: ctaylor738 on October 03, 2012, 02:18:45

Title: PN for Transmission Plate Bolts
Post by: ctaylor738 on October 03, 2012, 02:18:45

I finally dropped the engine and transmission in my 280SL project yesterday.  I have a large collection of M10 bolts similar to those that hold the transmission support plate to the frame.  Could someone with a paper parts book look up the PN for these bolts so I can find them in the DIN book?  The plate and bolts don't seem to be in the EPC.  I believe that they are M10 x 20 but I would like to be sure.

TIA

Title: Re: PN for Transmission Plate Bolts
Post by: Jack Jones on October 03, 2012, 21:00:26

The bolts are part number N000933-010128 that is a DIN 933 10 x 20 8451-22 (Cad finish) The plate is on the EPC under 68 Covering and Lining, item 17.

Title: Re: PN for Transmission Plate Bolts
Post by: ctaylor738 on October 03, 2012, 22:44:33

Thanks.  Good catch/nice EPC sleuthing.  Beer is on me.

I looked there but thought it was an interior piece.