Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: hank sound on November 29, 2011, 01:37:48
-
Hi folks,
I checked the Technical Manual to find out how to replace the glass in my exterior mirror housing. Couldn't find anything so can someone advise me ? I'm guessing one would push the glass inward, twist and then remove, but I don't want to cause damage so I'll wait for a helping hand. Could be a good tip worthy of the "Manual"......
Thanks much, Hank
Post update - - forget about it :) I just found a complete mirror with perfect glass and a housing that is much nicer than what I have. I looked for a "delete this post" button, to no avail.
Thanks, Hank
-
As I recall: push the glas inward. This enables you to pick out the plastic bead around the perimeter. With the bead (retainer) out the glass follows.
Gus
-
What Gus notes is correct. I'll also add behind the mirror is a spring, so be ready for this to fall out if you don't have your hands ready to catch it.
Rolland
-
Any ideas where to find a replacement for the plastic bead or the glass mirror it self?
-
Buds and K&K both carry them as well as many others I am sure. Check suppliers list.
-
The Classic Center has them as well. If you have a mirror on the right side, they also have the convex mirror if you wish.
Rolland