Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Gerry on September 10, 2011, 04:08:49

Title: 1969 280 SL coil bracket finish
Post by: Gerry on September 10, 2011, 04:08:49

Can any one tell me what the original finish was on the coil bracket, machine screw and square nut was. I beleve it was yellow zinc or gold cadmium. Your input will be greatly appreceated. Thanks, Gerry

Title: Re: 1969 280 SL coil bracket finish
Post by: 280SE Guy on September 10, 2011, 11:47:35

They say a picture is worth a thousand words. Not an SL but from my 1971 280SE:

(https://lh3.googleusercontent.com/-VcbeQQkP8Fw/TmtOC_7YTMI/AAAAAAAAA-8/0Tis3VIgTZA/s800/DSCN0098.jpg)

Hope this helps,

280SE Guy