Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: Dave on July 08, 2011, 02:04:38

Title: Seat question
Post by: Dave on July 08, 2011, 02:04:38

Helllo
My driver's seat does not go all the way back.  There is about 2 inches (50mm) betweeen the back of the seat and the rear shelf.  My passenger seat goes all the way back and touches.  The tracks are clear, and both seats slide forward and back ok.  But as you look into the car, the passenger seat is about 2 inches behind the dirver's seat when they are all the way back.  I could use the room, as my legs barely fit under the steering wheel.  Any ideas out there?  67 230sl

Title: Re: Seat question
Post by: thelews on July 08, 2011, 02:39:47

Take the seat out to see what the obstruction may be.  It could be on the seat or the car side.

Title: Re: Seat question
Post by: treedoc on July 09, 2011, 19:43:48

Check the holdown holes in the floor there could be two sets on the drivers side to allow for short people to site far forward