Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: rmmchl on May 25, 2011, 23:38:05
-
My rubber plugs that fit on the floor pan part under the seats deteriorated. Does anyone know the part number to these. without them I have a hole right through the pan.
-
Do you have a picture and the size of the holes? I am stripping a parts car and there are allot of grommets that are good.
-
badali-I don't have a way of putting pictures on. They are about a 3/8 inch circular hole on the passenger side on the pan under the seat, about 4 inches from the console box hump, on the floor pan. I think there is one the passenger side also. Rubber grommetts go in the hole. When I was scrapping the tar crap off of my floor pans, they dissolved.The rubber was dri-rotted.
-
I'll see if I can salvage some from the parts car. If I have any you can have them free. I'll look tomorrow.
-
I found 2 type of floor plugs. The first one is rubber and the second is plastic and has threads. The only 3/8" holes I found in the floor were threaded for seat belt mounts. If these are the holes you need plugs for then I may have a few more. I could only salvage one but I think I have more in another box of parts. The other plugs I have a handful of and are also available.
-
It's the rubber one. the picture looks correct
-
How many do you need?
-
2------------------my e-mail is rmmchl@cs.com--------------e-mail me and I will give you my address -thank you