Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Travis71280 on May 11, 2011, 16:40:27

Title: Warm Running Device part question.
Post by: Travis71280 on May 11, 2011, 16:40:27

Does anybody know how long the plunger is suppose to be? It got seperated from the guide rod and I was wanting to know how long its suppose to be. Thanks.

Title: Re: Warm Running Device part question.
Post by: Travis71280 on May 13, 2011, 17:28:43

Anybody  ???

Title: Re: Warm Running Device part question.
Post by: wwheeler on May 13, 2011, 19:53:37

Travis,

I don't have that measurement but my concern is how are you going to secure the rod to the spring cap. I would be hesitant having something that could come apart inside the injection pump. Also keeping that rod dimension consistant may be a long term concern. If the rod dimension slipped just a little, it would easily throw off the cold running mixture and possibly the warm running mixture.

I would bet there are thousands of those WRD units in salvage yards you could get a good rod assembly from. Probably wouldn't hurt having some spare WRD parts and shims anyway.