Pagoda SL Group
W113 Pagoda SL Group => Electrical and Instruments => Topic started by: louisz on October 04, 2010, 16:55:46
-
Hi,
Im new here and I have a problem. I lost the ignition key while my car was in storage. The steering is locked and I have searched for a new ignition cylinder. I am unable to find one for a 71280sl. The only ones I have forund are for a 280SE...Will those work?
is there anyone who can make me a new key with my VIN #?
any help
Thankls
-
You can go to your local dealer with proof of ownership and serial# and they will order a new key for you.
The only caveat is that your vehicle has not had an ignition lock change.
-
Thanks, Ill try that but looking at the metal dash panel, it looks like someone may have changed it before.
-
You may be able to have a locksmith make a new key to fit the door handle, the handle is easily removed by taking one screw out behind the weatherstrip. The doors on a 71 280sl if original are keyed the same as the ignition. I'd reccomend taking out the right side handle as it will have less wear than the drivers side.
-
Hi Louis,
You might also want to get in contact with Jim, he should be able to help you.
See here:
http://www.sl113.org/forums/index.php?topic=13302
Good luck &
Best,
Achim