Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: ctaylor738 on September 23, 2010, 21:59:15

Title: Picture of under-cowl area needed
Post by: ctaylor738 on September 23, 2010, 21:59:15

Continuing to plod along on re-assembly in the dash/cowl area.  

Does anyone have a picture, descrption, or PNs of the fittings that secure the cables as they pass through this area?  I am assuming that the little tabs welded to the shell have some sort of cable clamp, but nothing is exactly leaping out of the parts pile and the EPC is not a lot of help.

Picture attached.

Thanks,

Title: Re: Picture of under-cowl area needed
Post by: ja17 on September 24, 2010, 05:21:48

Hello Clay,

The tabs hold little flat leaf spring clips.  They are used on the other end of the cables in the dash also if I recall correctly. They are quite common to the era in sedans etc. If you need some let me know and I can pick a handful from the "south forty" for you. May be able to snap a picture for you in the next day or two.

Take care,

Joe

Title: Re: Picture of under-cowl area needed
Post by: Bernd on September 24, 2010, 13:25:40

See attached pics. They are not normally painted but cad plated. Sorry, don't have P/N's either. Hope that helps

Title: Re: Picture of under-cowl area needed
Post by: parry on September 24, 2010, 21:59:17

Lock plate for bowden cables - MB Part number 006 799 004 001.

Part number not showing on MB Classics Parts Portal but showing available from SLS  Product No: 775158

Title: Re: Picture of under-cowl area needed
Post by: ctaylor738 on September 26, 2010, 12:02:29

Thanks, guys.  I do have some of those clips.  They are in the EPC, as "Lock plate."

All ot the handles in my heat/vent control unit are broken, one of the plastic lights is broken, and the cables are frozen.  So I sucked it up and bought a new one from MB.  

I will post some pictures of the cable clamps next week.

Cheers,

Title: Re: Picture of under-cowl area needed
Post by: ctaylor738 on October 04, 2010, 12:09:21

Here's a picture of the cables and clamps installed with hardware store grommets since the MB part was on backorder.  Also got the new heater/vent control installed as well as the outside vent and grille assembly.