Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: rmmchl on July 14, 2010, 01:29:50

Title: plastic tension rod holder
Post by: rmmchl on July 14, 2010, 01:29:50

does anyone have a close up picture or know which direction the grey plastic holder  is supposed to be screwed onto the bracket on the car body? . Also,I have 2 number 6 metric bolts and washers. screwing the rod holder on. I have seen pictures of 2 screws here instead. Does anyone know where I can obtain the number 6 metric screws for this application, if that's what supposed to be used?

Title: Re: plastic tension rod holder
Post by: J. Huber on July 14, 2010, 13:42:22

Here are a couple... guess which ones mine...

Title: Re: plastic tension rod holder
Post by: 114015 on July 14, 2010, 23:38:01

 :o :o

Do I see this correctly??
John's grey holder  is broken ...??? Really? The high res pic suggests something like that. :o

Can't really see that clearly on James' car.
Early 230ies should have this "plasic tension rod holder" (nice word) with a metal base, not with a plastic base.
 :D ;)

Best,

Title: Re: plastic tension rod holder
Post by: J. Huber on July 15, 2010, 00:42:49

Hi Achim, good eye as usual -- mine is a replacement part. I'll have to look at my old one to see if it was the original. And it does look like a crack on John's but maybe they were supposed to be that way  ;) ...

Title: Re: plastic tension rod holder
Post by: rmmchl on July 15, 2010, 00:47:26

it sure is cracked