Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: shimon zohar on March 10, 2010, 20:14:35
-
hi all
does any one know where i can find the rubber guard for front and rear bumper ?
please help
thanks
-
Can't tell from this whether they are sold seperately, but here's a link: http://www.sls-hh-shop.de/index.php/cat/c3_Mercedes-Benz-230SL-250SL-280SL-Pagoda--R113-W113-.html#cat_97_position_58_prod_0
Quite expensive, but why not switch to Euro-bumpers - they look much less clumsy?
Best regards
Ulf
-
thanks
but i need only the rubber.
shimon
-
I don't think the rubber covers have never been sold seperatly. These were not made by Mercedes or installed at the factory, but were installed after the cars were shipped to the USA either at the port of entry or at the USA dearship where the car was sold. When we ordered new bumper guards back in the 70s the replacements did not come in Mercedes packaging and were only sold as a set of 4. They were made for MBUSA by a subcontractor.
You might want to check with a USA based vendor that makes reproductions (K&K?) and ask if they sell just the rubbers.
-
There are two on ebay right now.
-
Here is the ebay auction.
http://cgi.ebay.com/ebaymotors/BRAND-NEW-Bumper-Guards-for-1963-1972-280sl_W0QQcmdZViewItemQQhashZitem35a7b3a9b4QQitemZ230446836148QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
usual disclaimers apply
-
thanks for your reply.
shimon
-
I don't think the rubber covers have never been sold seperatly. These were not made by Mercedes or installed at the factory, but were installed after the cars were shipped to the USA either at the port of entry or at the USA dearship where the car was sold.
Al,
what you say is correct for the Frigiking air condition but not for the bumper guards. Those were put on in the factory for the US delivery cars (from year 1969 on or so). Option code 44/0.
Please see
http://www.sl113.org/wiki/DataCard/OptionCodes
for further details.
Achim