Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: popiex3 on September 14, 2009, 02:52:51

Title: heater controls
Post by: popiex3 on September 14, 2009, 02:52:51

Hi,I've removed the heater control levers to clean and lubricate the cables. What I found was overspray from a previous owners dash repaint.After two days polishing all the plastic parts and metal frame I was curious if there were felt pieces between the frame and the levers.On the frame there were signs of some sort of glue near the front of the frame. I did this job once before about 1968 on my first 230sl a 1963. You would think I could remember, then again I don't remember what I had for breakfast this morning.Thanks for any advice.

Tom
           

Title: Re: heater controls
Post by: menesesjesse on September 14, 2009, 09:07:04

Yes I believe there was felt.  I just took mine apart and saw felt there between the levers

Title: Re: heater controls
Post by: Benz Dr. on September 15, 2009, 01:18:20

Are you asking about the metal casting that holds the ' pill bottles '* and all the levers in place? I've never seen anything on those things and I'm pretty sure it's just a bare metal piece.


* copy rite  Benz Dr.