Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: pagode.info on January 16, 2009, 13:55:55

Title: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: pagode.info on January 16, 2009, 13:55:55

Hello All & a very happy hello to Peter !!!

For all those who don`t want spend a lot of money...
...here is the part # of the rubber plug that covers the
heater core valve service hole in the firewall.

(see pic...)

113 987 24 44 (now available at any local Mercedes-Benz dealer)

Have a nice day !

TOM

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: Peter van Es on January 16, 2009, 13:58:49

Welcome back out of retirement, Tom  ;)

Peter

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: Jonny B on January 16, 2009, 14:42:56

Thanks for posting the information. I got one from Miller's this summer and, while the profile was correct, it was about 2-3 mm too small. Will check on this one.

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: Naj ✝︎ on January 16, 2009, 14:51:55

On my last two attempts with this part #, I received a poster tube cap like plug and again too small as Johnny says.  ???

naj

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: Anfinn on January 16, 2009, 14:58:23

In the same area:

After I removed the AC I was left with two 38mm dia. (1 1/2 in.) holes in the firewall.
I haven't found a MB part number for suitable blanking plugs, but SLS can supply them, no. 798772.

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: pagode.info on January 16, 2009, 15:54:21

I received a lot of wrong plugs in the past by trying several sources.
I learnt similar parts were used, with incorrect diameters. Last week
a correct one came in. That`s why I posted the #.

The hole diameter was 4,5 cm. Early cars did not have this hole from
factory. If someone drilled the hole later, it may not have 4,5cm.

Have a nice day,

TOM

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: hauser on January 16, 2009, 23:42:06

I purchased one from Tom Collit on eBay a couple months ago.  I don't know where he got them, but it has a nice snug fit and overall size as the original.

Title: Re: MBZ Part Number for Firewall Plug -> Heater Core Service Hole
Post by: badali on January 17, 2009, 08:13:17

I just bought one from the Classic Center and it was $6.  Very good fit.  They said it is in production again not new old stock.