Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Fab on June 29, 2020, 15:38:31

Title: Geometry set up 280 1970. what are the details/specs please?
Post by: Fab on June 29, 2020, 15:38:31

Hello all,

I would like to check the Front axle geometry of my pagode.

Could someone let me have the right setup specs for my 280 1970 please?

Many thanks.

Fabrice.

Title: Re: Geometry set up 280 1970. what are the details/specs please?
Post by: Fab on July 01, 2020, 06:17:51

Nobody for help me ?  :( :( :(

Title: Re: Geometry set up 280 1970. what are the details/specs please?
Post by: FGN59 on July 01, 2020, 09:34:54

Hello Fabrice,

There's some information on the forum (Technical Manual), assuming you are a full member: https://www.sl113.org/wiki/Suspension/Camber for instance

I include also some information I gathered either on this forum or outside, but I cannot vouch for it 100%.

Good luck

Title: Re: Geometry set up 280 1970. what are the details/specs please?
Post by: Fab on July 01, 2020, 11:16:17

Thank you so much !  :) :) :)