Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: jb280sl on June 19, 2019, 18:12:57

Title: check valve for brake booster
Post by: jb280sl on June 19, 2019, 18:12:57

I have had a vacuum leak test done on my early 1969 280SL, chassis 11408, and it appears that I need a check valve that goes between the brake booster and the intake manifold. Does anyone know where I might get this part. My repair place says that it isn't available and I need to rebuild.

Title: Re: check valve for brake booster
Post by: rgafitanu@gmail.com on June 19, 2019, 18:30:34

Almost any vacuum check valve that fits that hose size will do.

Title: Re: check valve for brake booster
Post by: kampala on June 19, 2019, 18:41:55

Something doesn't seem right.   

I thought these were very common and very available.  You certain your shop was referring to this check valve?  This is the one within the line from booster to intake manifold. 

https://www.rmeuropean.com/Products/0004313507-MFG4.aspx