Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: yves on February 11, 2023, 18:47:24

Title: 3d Part modification
Post by: yves on February 11, 2023, 18:47:24: I am repairing "again" ::) the cylinder of the light for the heating levers and have used the 3D file on the tech manual and saw a modification to do because it's difficult to fit the electric pin exactly in the correct location . i have to grind a very thin groove in the plastic part cover to match with the "tab" at the bottom of the pin. The stop on the 3D part is located too far in a rear position.
I hope you understand my basic english.... may be it's more easy with the photos below ...!
Title: Re: 3d Part modification
Post by: yves on February 12, 2023, 10:12:37: The 3D part fitted . I'll have to test the light through the "white cylinder" even with a LED it may be darker than with the clear original one !
Title: Re: 3d Part modification
Post by: Sead on February 12, 2023, 18:04:07: You wont get much light through these white cylinders...
you can buy clear one plexyglas cylinder... I made myself both new...
Title: Re: 3d Part modification
Post by: Pinder on February 13, 2023, 22:00:08: Excellent work!
Title: Re: 3d Part modification
Post by: dirkbalter on February 13, 2023, 23:32:01: Quote from: yves on February 11, 2023, 18:47:24
I am repairing "again" ::) the cylinder of the light for the heating levers and have used the 3D file on the tech manual and saw a modification to do because it's difficult to fit the electric pin exactly in the correct location . i have to grind a very thin groove in the plastic part cover to match with the "tab" at the bottom of the pin. The stop on the 3D part is located too far in a rear position.
I hope you understand my basic english.... may be it's more easy with the photos below ...!

I believe I created the model a while back. I couldn’t find the parts then. It worked for me but I am happy to modify it if you can supply dimension and or sketch.