Pagoda SL Group
W113 Pagoda SL Group => Items for Sale => Topic started by: 450sl on November 05, 2022, 14:56:21
-
I recently fitted a 6speed box, but before that i had the Getrag 5 speed .
The Getrag has reversegear right next to firstgear select , and many boxes have little problem in selecting reverse in stead of firstgear.
To overcome this i made this attachment to clearly seperate First and Reverse , its a one off and works like a charm its extraspringload is adjustable.
Its no visible because it disappears completely under the rubber.
50 euro ex shipping
and the knob 20 euro ex shipping
-
Is this for the Getrag 265?
Any instructions? Does the trans need to come apart or is this outside and can be installed in situ?
-
Hi, I've sent you an email
-
Hi Teahead, thanks for asking.
Is a one-off i made for myself , it does not reflect the work gotten into at all, i just wanted a good home for it , and beware it for the skip..
All the work can be done from inside the car.
You have to take off the knob and rubber first , then remove the two m6 nuts , install the first ring onto the 2 m6 studs , and after that install the upper part with the two m6 bolts.
reinstall the rubber and knob and the job is done. it really is selfexplaining..
regards mark
-
Knob sold to Gordon. thanks