« previous next »
Pages: [1]

Author Topic: coolant bypass hose  (Read 5750 times)

twoods

  • Guest
coolant bypass hose
« on: October 22, 2007, 19:48:09 »
Is it possible to remove and replace the coolant bypass hose located under the thermostat housing without removing the air conditioner and alternator bracket? If so, how is it done? Your help would be appreciated.
twoods
71 280SL
Logged

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7317
Re: coolant bypass hose
« Reply #1 on: October 22, 2007, 19:56:42 »
Hello twoods,

I am sorry to tell you that it is not possible to replace this hose if you are dealing with the original AC bracket. Removal of the AC bracket is a real task.

Is this just preventative maintenance or do you have a leak?



Joe Alexander
Blacklick, Ohio
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

twoods

  • Guest
Re: coolant bypass hose
« Reply #2 on: October 22, 2007, 22:39:38 »
quote:
Originally posted by ja17

Hello twoods,

I am sorry to tell you that it is not possible to replace this hose if you are dealing with the original AC bracket. Removal of the AC bracket is a real task.

Is this just preventative maintenance or do you have a leak?



Joe Alexander
Blacklick, Ohio
I have a leak and it needs to be renewed. I thought this was the case but I needed a second opinion because it is difficult. Thank you for your response.
Logged

waqas

  • Full Member
  • Platinum
  • ******
  • USA, TX, Austin
  • Posts: 1738
Re: coolant bypass hose
« Reply #3 on: October 23, 2007, 09:36:38 »
Yes, like Joe said, it's a really tedious a job.

However, if you do decide to take things apart, it might be an excellent opportunity to replace a whole slew of cooling-related hoses and gaskets in that area.

Waqas ('Wa-kaas') in Austin, Texas
« Last Edit: October 23, 2007, 09:37:27 by waqas »
Logged
Waqas (Wa-kaas) in Austin, Texas

al_lieffring

  • Guest
Re: coolant bypass hose
« Reply #4 on: October 23, 2007, 10:08:22 »
quote:
Originally posted by waqas

Yes, like Joe said, it's a really tedious a job.

However, if you do decide to take things apart, it might be an excellent opportunity to replace a whole slew of cooling-related hoses and gaskets in that area.

Waqas ('Wa-kaas') in Austin, Texas


This would be a good time to replace the water pump too, The A/C belts and tensioner places a lot of extra load on the water pump bearings.

Al Lieffring
66 230Sl
a-cheesin with a new 85 l. tank
Logged

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 564
Re: coolant bypass hose
« Reply #5 on: October 23, 2007, 13:29:24 »
Al Lieffring:

You explained "Jonesing". Now what does "a cheesin" mean?

Gus
68 280sl
« Last Edit: October 23, 2007, 13:30:50 by 69280sl »
Logged
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084

al_lieffring

  • Guest
Re: coolant bypass hose
« Reply #6 on: October 23, 2007, 21:38:42 »
quote:
Originally posted by 69280sl

Al Lieffring:

You explained "Jonesing". Now what does "a cheesin" mean?

Gus
68 280sl


In the mid-70s, mid-western, urban vernacular that I am referencing, it seemed there were 3 states of "be"

a-Wiggin'; Angry (flipped his wig)
a-Cheesin'; Happy, smiling, (say cheese)
a-Jonesin'; Desiring, craving (keeping up with the Joneses)
I imagine there were others too, but these were the ones that Jack the porter at our shop used the most.

So far I am quite pleased with the results of the new fuel tank installation.

Al Lieffring
66 230Sl
a-cheesin with a new 85 l. tank
Logged
Pages: [1]
« previous next »