Recent Posts

1

Drive train, fuel, suspension, steering & brakes / Re: 123 distributor fail

« Last post by VikDasor on Today at 12:19:09 »

Hi Matt,

I had installed the 123 ignition while ago and I also remember I had to change the Ballast resistor too. May be look into that too.

Hope this helps.

2

Photo Gallery / Sunny Sunday

« Last post by ScouseJames on Today at 11:55:12 »

Enjoyed a lovely top-down drive out to an SL meet yesterday

3

General Discussion / Re: Engine bay cable plugged with a Philips head screw?

« Last post by RichardPercival on Today at 11:27:50 »

Thanks Sead,
Does that mean it is meant to look like that/would have come from the factory with this line with a screw in it?

4

Way Off Topic / Re: Pour tous nos membres français...

« Last post by yves on Today at 11:19:31 »

First thing to do every morning ….
With a nice coffe….👍😊

5

General Discussion / Re: Engine bay cable plugged with a Philips head screw?

« Last post by Sead on Today at 10:30:34 »

Looks like vacuum line for distributor...

6

Events / Cars at The castle

« Last post by RAY on Today at 08:48:57 »

There is also another car gathering at Hever Castle on the 15 & 16 June called Cars at The Castle.

Apparently the 16th is already fully booked but some places are available for the 15th.

The castle is well worth a visit and has a spectacular Italian Garden and lake.

7

Drive train, fuel, suspension, steering & brakes / Re: Injectors

« Last post by rosch on Today at 08:23:02 »

Check my earlier post , search for  "injector rescue"
Got all my 6 injectors working again.
You might try it yourself. Nothing to lose...

8

General Discussion / Re: Engine bay cable plugged with a Philips head screw?

« Last post by RichardPercival on Today at 04:14:58 »

Maybe clearer

9

General Discussion / Engine bay cable plugged with a Philips head screw?

« Last post by RichardPercival on Today at 04:12:50 »

Sorry all, as I am not experienced with the engine side of the Pagoda at all.

I was trying to follow the wire from the radio fuse box and instead on the way found this -

Does anyone know what this cable plugged by a Philips head screw might be?

The tube itself looks like many around it, but having a screw in the end seems unlikely to be factory 😂

Thanks for any thoughts - the car seems to run fine so hopefully not that important!

10

Way Off Topic / Re: Pour tous nos membres français...

« Last post by jKrashnburn on Today at 03:01:59 »

Pour moi aussi s'il vous plait!