Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: ChrisInNashville on September 05, 2021, 19:18:44
-
While investigating my hood misalignment:
(https://flic.kr/p/2mms96z)
https://flic.kr/p/2mms96z
I popped it up and heard a screw drop.
Concerned that I struggle to find its home, It was an “ough oh” moment when I looked down and saw a very short screw laying in the floor. Alas, it took a minute to see that the dropped screw came from the hood release/latch:
(https://flic.kr/p/2mms9ER)
https://flic.kr/p/2mms9ER
All four screws were loose and this was the source of the hood misalignment.
This is a freshly restored car.
Two things:
- what might I treat the screws with to keep them tight, and
- should I be concerned that this is happening with other screws of a more critical nature?
-
Parts list says: hex screws 5x12, washers and spring washers. Did you have spring washers there?
-
Those are conical head screws. How could washer and spring washer possibly work?
-
Blue Loctite.