Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: 450sl on March 06, 2018, 15:37:59
-
I need to cut holes through the firewall in order to install a frigiking underdash unit.
Can someone give me the location of both the holes ? any pics?
thanks
Mark
-
https://www.sl113.org/wiki/uploads/Cooling/Air%20Conditioning%20Installation%20Instructions%20for%20Mercedes%20Benz%20280SL.pdf
-
Thanks , but on this picture the lower hose seems to be located elsewere...
A picture of a bare firewall would be great.
thanks
Mark
-
Its behind the expansion tank.
-
If you have the original firewall pad it should have perforations where the holes should be.
-
Thanks Shvegel ; no : i have the forum-firewallpad without the perfo-indicators : do you have a pic of your underdash to Sandenpump hose routing?
Thanks Rbouch8828 ; is the a chance of making a picture of the area behind your expansion tank?
I not sure witch dryer/filter to use and/or hose-routing , because of a possible collision of the lower hose to dryerhousing..
thanks
Mark
-
My car is with Joe in Blacklick right now. Perhaps Joe could do that for you. Why don't you drop him an email?
-
I found this picture that I took of the firewall prior to refinishing, that shows the 2 Frigiking hoses. I have marked them with arrows.
-
Very helpfull thank you very much.